This deletes a big ol' chunk of code related to letters. It's not everything—there are still a few things that might be tied to sms/email—but it's the the heart of letters function. SMS and email function should be untouched by this.
Areas affected:
- Things obviously about letters
- PDF tasks, used for precompiling letters
- Virus scanning, used for those PDFs
- FTP, used to send letters to the printer
- Postage stuff
This fixes a bug where (letter) notifications left in sending would
temporarily get excluded from billing and status calculations once
the service retention period had elapsed, and then get included once
again when they finally get marked as delivered.*
Status and billing tasks shouldn't need to have knowledge about which
table their data is in and getting this wrong is the fundamental cause
of the bug here. Adding a view across both tables abstracts this away
while keeping the query complexity the same.
Using a view also has the added benefit that we no longer need to care
when the status / billing tasks run in comparison to the deletion task,
since we will retrieve the same data irrespective (see below for a more
detailed discussion on data integrity).
*Such a scenario is rare but has happened.
A New View
==========
I've included all the columns that are shared between the two tables,
even though only a subset are actually needed. Having extra columns
has no impact and may be useful in future.
Although the view isn't actually a table, SQLAlchemy appears to wrap
it without any issues, noting that the package doesn't have any direct
support for "view models". Because we're never inserting data, we don't
need most of the kwargs when defining columns.*
*Note that the "default" kwarg doesn't affect data that's retrieved,
only data that's written (if no value is set).
Data Integrity
==============
The (new) tests cover the main scenarios.
We need to be careful with how the view interacts with the deletion /
archiving task. There are two concerns here:
- Duplicates. The deletion task inserts before it deletes [^1], so we
could end up double counting. It turns out this isn't a problem because
a Postgres UNION is an implicit "DISTINCT" [^2]. I've also verified this
manually, just to be on the safe side.
- No data. It's conceivable that the query will check the history table
just before the insertion, then check the notifications table just after
the deletion. It turns out this isn't a problem either because the whole
query sees the same DB snapshot [^3][^4].*
*I can't think of a way to test this as it's a race condition, but I'm
confident the Postgres docs are accurate.
Performance
===========
I copied the relevant (non-PII) columns from Production for data going
back to 2022-04-01. I then ran several tests.
Queries using the new view still make use of indices on a per-table basis,
as the following query plan illustrates:
QUERY PLAN
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
GroupAggregate (cost=1130820.02..1135353.89 rows=46502 width=97) (actual time=629.863..756.703 rows=72 loops=1)
Group Key: notifications_all_time_view.template_id, notifications_all_time_view.sent_by, notifications_all_time_view.rate_multiplier, notifications_all_time_view.international
-> Sort (cost=1130820.02..1131401.28 rows=232506 width=85) (actual time=629.756..708.914 rows=217563 loops=1)
Sort Key: notifications_all_time_view.template_id, notifications_all_time_view.sent_by, notifications_all_time_view.rate_multiplier, notifications_all_time_view.international
Sort Method: external merge Disk: 9320kB
-> Subquery Scan on notifications_all_time_view (cost=1088506.43..1098969.20 rows=232506 width=85) (actual time=416.118..541.669 rows=217563 loops=1)
-> Unique (cost=1088506.43..1096644.14 rows=232506 width=725) (actual time=416.115..513.065 rows=217563 loops=1)
-> Sort (cost=1088506.43..1089087.70 rows=232506 width=725) (actual time=416.115..451.190 rows=217563 loops=1)
Sort Key: notifications_no_pii.id, notifications_no_pii.job_id, notifications_no_pii.service_id, notifications_no_pii.template_id, notifications_no_pii.key_type, notifications_no_pii.billable_units, notifications_no_pii.notification_type, notifications_no_pii.created_at, notifications_no_pii.sent_by, notifications_no_pii.notification_status, notifications_no_pii.international, notifications_no_pii.rate_multiplier, notifications_no_pii.postage
Sort Method: external merge Disk: 23936kB
-> Append (cost=114.42..918374.12 rows=232506 width=725) (actual time=2.051..298.229 rows=217563 loops=1)
-> Bitmap Heap Scan on notifications_no_pii (cost=114.42..8557.55 rows=2042 width=113) (actual time=1.405..1.442 rows=0 loops=1)
Recheck Cond: ((service_id = 'c5956607-20b1-48b4-8983-85d11404e61f'::uuid) AND (notification_type = 'sms'::notification_type) AND (notification_status = ANY ('{sending,sent,delivered,pending,temporary-failure,permanent-failure}'::text[])) AND (created_at >= '2022-05-01 23:00:00'::timestamp without time zone) AND (created_at < '2022-05-02 23:00:00'::timestamp without time zone))
Filter: ((key_type)::text = ANY ('{normal,team}'::text[]))
-> Bitmap Index Scan on ix_notifications_no_piiservice_id_composite (cost=0.00..113.91 rows=2202 width=0) (actual time=1.402..1.439 rows=0 loops=1)
Index Cond: ((service_id = 'c5956607-20b1-48b4-8983-85d11404e61f'::uuid) AND (notification_type = 'sms'::notification_type) AND (notification_status = ANY ('{sending,sent,delivered,pending,temporary-failure,permanent-failure}'::text[])) AND (created_at >= '2022-05-01 23:00:00'::timestamp without time zone) AND (created_at < '2022-05-02 23:00:00'::timestamp without time zone))
-> Index Scan using ix_notifications_history_no_pii_service_id_composite on notifications_history_no_pii (cost=0.70..906328.97 rows=230464 width=113) (actual time=0.645..281.612 rows=217563 loops=1)
Index Cond: ((service_id = 'c5956607-20b1-48b4-8983-85d11404e61f'::uuid) AND ((key_type)::text = ANY ('{normal,team}'::text[])) AND (notification_type = 'sms'::notification_type) AND (created_at >= '2022-05-01 23:00:00'::timestamp without time zone) AND (created_at < '2022-05-02 23:00:00'::timestamp without time zone))
Filter: (notification_status = ANY ('{sending,sent,delivered,pending,temporary-failure,permanent-failure}'::text[]))
Planning Time: 18.032 ms
Execution Time: 759.001 ms
(21 rows)
Queries using the new view appear to be slower than without, but the
differences I've seen are minimal: the original queries execute in
seconds locally and in Production, so it's not a big issue.
Notes: Performance
==================
I downloaded a minimal set of columns for testing:
\copy (
select
id, notification_type, key_type, created_at, service_id,
template_id, sent_by, rate_multiplier, international,
billable_units, postage, job_id, notification_status
from notifications
) to 'notifications.csv' delimiter ',' csv header;
CREATE TABLE notifications_no_pii (
id uuid NOT NULL,
notification_type public.notification_type NOT NULL,
key_type character varying(255) NOT NULL,
created_at timestamp without time zone NOT NULL,
service_id uuid,
template_id uuid,
sent_by character varying,
rate_multiplier numeric,
international boolean,
billable_units integer NOT NULL,
postage character varying,
job_id uuid,
notification_status text
);
copy notifications_no_pii from '/Users/ben.thorner/Desktop/notifications.csv' delimiter ',' csv header;
CREATE INDEX ix_notifications_no_piicreated_at ON notifications_no_pii USING btree (created_at);
CREATE INDEX ix_notifications_no_piijob_id ON notifications_no_pii USING btree (job_id);
CREATE INDEX ix_notifications_no_piinotification_type_composite ON notifications_no_pii USING btree (notification_type, notification_status, created_at);
CREATE INDEX ix_notifications_no_piiservice_created_at ON notifications_no_pii USING btree (service_id, created_at);
CREATE INDEX ix_notifications_no_piiservice_id_composite ON notifications_no_pii USING btree (service_id, notification_type, notification_status, created_at);
CREATE INDEX ix_notifications_no_piitemplate_id ON notifications_no_pii USING btree (template_id);
And similarly for the history table. I then created a sepatate view
across both of these temporary tables using just these columns.
To test performance I created some queries that reflect what is run
by the billing [^5] and status [^6] tasks e.g.
explain analyze select template_id, sent_by, rate_multiplier, international, sum(billable_units), count(*)
from notifications_all_time_view
where
notification_status in ('sending', 'sent', 'delivered', 'pending', 'temporary-failure', 'permanent-failure')
and key_type in ('normal', 'team')
and created_at >= '2022-05-01 23:00'
and created_at < '2022-05-02 23:00'
and notification_type = 'sms'
and service_id = 'c5956607-20b1-48b4-8983-85d11404e61f'
group by 1,2,3,4;
explain analyze select template_id, job_id, key_type, notification_status, count(*)
from notifications_all_time_view
where created_at >= '2022-05-01 23:00'
and created_at < '2022-05-02 23:00'
and notification_type = 'sms'
and service_id = 'c5956607-20b1-48b4-8983-85d11404e61f'
and key_type in ('normal', 'team')
group by 1,2,3,4;
Between running queries I restarted my local database and also ran
a command to purge disk caches [^7].
I tested on a few services:
- c5956607-20b1-48b4-8983-85d11404e61f on 2022-05-02 (high volume)
- 0cc696c6-b792-409d-99e9-64232f461b0f on 2022-04-06 (highest volume)
- 01135db6-7819-4121-8b97-4aa2d741e372 on 2022-04-14 (very low volume)
All execution results are of the same magnitude using the view compared
to the worst case of either table on its own.
[^1]: 00a04ebf54/app/dao/notifications_dao.py (L389)
[^2]: https://stackoverflow.com/questions/49925/what-is-the-difference-between-union-and-union-all
[^3]: https://www.postgresql.org/docs/current/transaction-iso.html
[^4]: https://dba.stackexchange.com/questions/210485/can-sub-selects-change-in-one-single-query-in-a-read-committed-transaction
[^5]: 00a04ebf54/app/dao/fact_billing_dao.py (L471)
[^6]: 00a04ebf54/app/dao/fact_notification_status_dao.py (L58)
[^7]: https://stackoverflow.com/questions/28845524/echo-3-proc-sys-vm-drop-caches-on-mac-osx
This is so we have granular data about billable units and costs
so that we can handle multiple sms rates within one financial
year.
We also cast chargeable_units_used_so_far in that subquery
to integer so we don't have type mismatch.
Co-authored-by: Leo Hemsted <leo.hemsted@digital.cabinet-office.gov.uk>
This is functionally very similar to query_service_sms_usage_for_year,
except this query filters by organisation and returns for all live services
within that organisation.
To ensure that the cumulative free allowance counter resets properly for
each service, we use the `partition_by` flag to group up the window
function[^1]. This magically handles all the free allowances
independently for each service.
[^1]: https://www.postgresql.org/docs/current/tutorial-window.html
Co-authored-by: Leo Hemsted <leo.hemsted@digital.cabinet-office.gov.uk>
