If a library has groups, we should show a link instead of selecting the
group directly.
Then we can give the user the choice of selecting the whole of that
group, or specific areas within the group.
For now the only libraries we have with groups are local authorities,
which group electoral wards.
This is an initial, prototype-quality attempt at introducing some kind
of tour for users new to broadcasting. A lot of the users we’re speaking
to don’t have a good concept of what broadcasting means, which is
causing usability problems down the line.
We did a similar thing in the early days of Notify to explain the
concept of message templates and personalisation.
If a broadcast definitely shouldn’t go out (for example because it has a
spelling mistake or is going to the wrong areas) then we should have a
way of removing it. Once it’s removed no-one else can approve it, and it
isn’t cluttering up the dashboard.
This is a link (because it’s a secondary action) and red (because it’s
destructive, in that it’s throwing away someone’s work).
Since new broadcasts will go into `pending-approval`, we now need a way
of approving them.
This commit adds a button to this page to start (or approve) the
broadcast. This button is wrapped in a bordered box, to emphasise that
it’s something consequential.
Same technique as we use for other pages that update via AJAX.
I’ve split the page up into separate chunks because the DiffDOM library
we use finds it easier to work out what’s changed when there are fewer
elements/a shallower tree.
To make the interface as simple as possible we don’t want to mix up
sending other types of communication where services have the broadcast
permission.
This commit removes the other permissions once a service has been given
the broadcast permission by a platform admin user.
This commit adds a page to view a single broadcast. This is important
for two reasons:
- users need an audit of what happened when, and who else was involved
in approving or cancelling a broadcast
- we need a place to put actions (approving, cancelling) on a broadcast
so that you can confirm details of the message and the areas before
performing the action
Currently this is a `get` request from the dashboard. Once we have a page
for viewing an individual broadcast it should probably show there
instead and be a `get`/confirm/`post` loop like for deleting a template.
These are just so we have some pages to click through for now. They
don’t use real templates, or any of the broadcast stuff from the
database.
But I think it’s useful to get some skeleton pages in first so that we
can see the map etc working in production, then build on that, without
having to do it all in one mega PR.
For that reason there are two short term things I’ve done in this commit
which should be revisited soon:
- no tests for the endpoints
- data about which areas are selected is stored in the session
We’re removing it for performance reasons.
This means removing the old pages that edited the letter contact block
when it was stored directly on the service, rather than the current
model where a service can have multiple contact blocks.
Google’s documentation says:
> robots.txt is not a mechanism for keeping a web page out of Google. To
> keep a web page out of Google, you should use noindex directives
We’ve implemented a noindex directive now, so we don’t need to serve
robots.txt any more.
Because we won’t be showing uploaded letters individually on the uploads
page any more we need a way of listing them. This should be by printing
day, to match how we’re grouping them on the uploads page.
This code reuses the notifications.html template, but flips the
precedence of the filename and recipient because I reckon when you’re
looking at uploads you’re thinking filename-first.
Some email clients will pre-fetch links in emails to check whether
they’re safe. This has the unfortunate side effect of claiming the token
that’s in the link.
Long term, we don’t want to let the link be used multiple times, because
this reduces how secure it is (eg someone with access to your browser
history could re-use the link even if you’d signed out).
Instead, this commit adds an extra page which is served when the user
clicks the link from the email. This page includes a form which submits
to the actual URL that uses the token, thereby not claiming the token as
soon as the page is loaded.
For convenience, this page also includes some Javascript which clicks
the link on the user’s behalf. If the user has Javascript turned off
they will see the link and can click it themselves. This is going on the
assumption that whatever the email clients are doing when prefetching
the link doesn’t involve running any Javascript.
This Javascript is inlined so that:
- it is run as fast as possible
- it’s more resilient – even if our assets domain is unreachable or the
connection is interrupted, it will still run
This commit does two things:
- brings the ‘All organisations’ page back within the platform admin
part of the site (because it’s hard to find otherwise)
- makes the layouts of all the pages within platform admin a bit closer
to the service-specific pages in terms of heading sizes, spacing, etc
so that moving between them doesn’t feel so jumpy
rather than in multiple placeholders - this is the first step towards
making postcodes non-required, which is the first step towards
international letters.
they still populate address_line_# and postcode fields under the hood -
to keep validation working the same, the last line always goes into
`postcode`.
the form normalises whitespace, removes extra new lines, and enforces
that you have between three and seven lines.
if the letter repeats address placeholders further down (eg "Dear
((address_line_1))"), then it'll fill those in as well. It'll still
prompt you to fill them in, but they'll be pre-filled.
We have a policy about how suppliers are allowed to use Notify. But we
don’t explain it anywhere. Which drives contact to our support form.
This commit that adds a new page that explains the policy.
I’ve moved the related content about who else can use Notify from the
get started page to this page as well, where it doesn’t need to sit in
a details element.
We can’t give advice to members of the public, but increasingly we’re
seeing them try to use our support form to ask.
It would be better for them if we can direct them straight to somewhere
more useful, before they have the chance to raise a support ticket.
This commit replaces the report a problem/ask a question triaging for
users who aren’t signed in. It’s not possible for non-signed-in users to
raise an priority 1 ticket, so we never need to triage the tickets in
this way.
Instead we can triage people based on whether they work in the public
sector or not. If they do then we send them on to the feedback form. If
not then they go to a new page which contains some useful links. We’ve
chosen these links based on some analysis of the support tickets we’ve
received recently[1]
1. https://docs.google.com/spreadsheets/d/1uBQn-ZnCYfz6ltFaUKZpytgvBF0-MeshCLZ1cD74R0c/edit?usp=sharing
This page is slow to load which means:
- it’s annoying for us
- it’s potentially causing load on the database
This commit does two things to reduce the amount we’re unnecessarily
looking at this page:
1. Avoid redirecting to it when signing in as a platform admin user
2. Don’t go directly to it when clicking ‘platform admin’ at the top,
but instead show a holding page (there’s a fair chance you’ve clicked
that link in order to go and manage some email branding or find a
user, not wait for stats to load)
You’ll be able to use a contact list by first choosing a template, then
choosing the list you want to use.
At the moment this shows all lists, not just the ones that are
compatible with your template.
In order to use a contact list we’re going to put you in the normal
upload a spreadsheet journey. Except without having to upload again.
So this commit adds an endpoint that takes the file from the contact
list bucket, puts it in the same place it would have gone if you’d
uploaded it, then sends you on your way.
We increasingly have teams wanting to do business-continuity type
messaging. They might be without access to their normal systems, which
is where they would otherwise go to get the list of email addresses or
phone numbers.
So we want to give them a place in Notify where they can store their
spreadsheets and use them at a later date.
For the initial pass we’re going to scope this to only allowing
spreadsheets with one column, ie just phone numbers/email addresses.
This is because:
- it minimises the amount of personal info we’re storing
- it reduces the chance of getting a placeholder error when you go to
send the message, which is probably a high-stress situation where you
might not be able to re-generate the file
The code for this is mostly copied from the existing upload CSV journey.
It’s quite duplicative, but that’s what I needed to do to get this out
quickly. There are opportunities for refactoring later.
Similarly, I would have liked to split this up into better commit
messages, but it really was a case of just bashing code out until it
worked 😳
This commit does not:
- implement the ‘view a contact list page’ (it just has a placeholder
because the API isn’t ready at the moment)
- link to this page (because it’s not ready to use yet)
The uploads and jobs page should start showing in the _Uploads_ menu on
the left hand side.
If you’ve navigated to a job from the uploads page (ie you haven’t got
to that page because you’ve just sent the job) then you should see a
link back to the uploads page.
Includes:
- removing all styling of those links
outside of GOV.UK Frontend (except for a few fixes
due to their interaction with our design)
- bringing together some duplicate styles into one
block
- changing how links are marked as selected, now
they have multiple classes
Fix Sass-lint error in navigation.scss
Includes:
- removing all styling of those links
outside of GOV.UK Frontend (except for a few fixes
due to their interaction with our design)
- bringing together some duplicate styles into one
block
- changing how links are marked as selected, now
they have multiple classes
Fix Sass-lint error in navigation.scss
We had two templates that contained a link styled as an old style
button but that weren't being used anywhere (one would actually give a
`500` if you tried to visit it). This removes them and the view function
for one of them (the other no longer had a view function).
This way we have a URL we can give people that always points to the
latest version of the spec.
And it makes our code more Flask-idiomatic to be using `url_for` to be
generating a URL, rather than passing around a constant.
It’s useful to get some kind of preview of the report before you
download it.
And if there’s only a few letters in there then you might not even need
to download it at all.
For teams with lots of letters we don’t want the page to load too slowly
so let’s cap the number of displayed items to 50, same as previewing
a spreadsheet.
