Files
notifications-admin/tests/javascripts/updateContent.test.js

244 lines
7.3 KiB
JavaScript
Raw Normal View History

Delay AJAX calls if the server is slow to respond By default our AJAX calls were 2 seconds. Then they were 5 seconds because someone reckoned 2 seconds was putting too much load on the system. Then we made them 10 seconds while we were having an incident. Then we made them 20 seconds for the heaviest pages, but back to 5 seconds or 2 seconds for the rest of the pages. This is not a good situation because: - it slows all services down equally, no matter how much traffic they have, or which features they have switched on - it slows everything down by the same amount, no matter how much load the platform is under - the values are set based on our worst performance, until we manually remember to switch them back - we spend time during incidents deploying changes to slow down the dashboard refresh time because it’s a nothing-to-lose change that might relieve some symptoms, when we could be spending time digging into the underlying cause This pull request makes the Javascript smarter about how long it waits until it makes another AJAX call. It bases the delay on how long the server takes to respond (as a proxy for how much load the server is under). It’s based on the square root of the response time, so is more sensitive to slow downs early on, and less sensitive to slow downs later on. This helps us give a more pronounced difference in delay between an AJAX call that is fast (for example the page for a single notification) and one that is slow (for example a dashboard for a service with lots of traffic). *Some examples of what this would mean for various pages* Page | Response time | Wait until next AJAX call ---|---|--- Check a reply to address | 130ms | 1,850ms Brand new service dashboard | 229ms | 2,783ms HM Passport Office dashboard | 634ms | 5,294ms NHS Coronavirus Service dashboard | 779ms | 5,977ms _Example of the kind of slowness we’ve seen during an incident_ | 6,000ms | 18,364ms GOV.UK email dashboard | `HTTP 504` | 😬
2020-04-08 17:55:53 +01:00
const each = require('jest-each').default;
const jestDateMock = require('jest-date-mock');
2019-09-02 14:27:46 +01:00
const helpers = require('./support/helpers.js');
const serviceNumber = '6658542f-0cad-491f-bec8-ab8457700ead';
const resourceURL = `/services/${serviceNumber}/notifications/email.json?status=sending%2Cdelivered%2Cfailed`;
const updateKey = 'counts';
let responseObj = {};
let jqueryAJAXReturnObj;
beforeAll(() => {
// ensure all timers go through Jest
jest.useFakeTimers();
// mock the bits of jQuery used
jest.spyOn(window.$, 'ajax');
// set up the object returned from $.ajax so it responds with whatever responseObj is set to
jqueryAJAXReturnObj = {
done: callback => {
Delay AJAX calls if the server is slow to respond By default our AJAX calls were 2 seconds. Then they were 5 seconds because someone reckoned 2 seconds was putting too much load on the system. Then we made them 10 seconds while we were having an incident. Then we made them 20 seconds for the heaviest pages, but back to 5 seconds or 2 seconds for the rest of the pages. This is not a good situation because: - it slows all services down equally, no matter how much traffic they have, or which features they have switched on - it slows everything down by the same amount, no matter how much load the platform is under - the values are set based on our worst performance, until we manually remember to switch them back - we spend time during incidents deploying changes to slow down the dashboard refresh time because it’s a nothing-to-lose change that might relieve some symptoms, when we could be spending time digging into the underlying cause This pull request makes the Javascript smarter about how long it waits until it makes another AJAX call. It bases the delay on how long the server takes to respond (as a proxy for how much load the server is under). It’s based on the square root of the response time, so is more sensitive to slow downs early on, and less sensitive to slow downs later on. This helps us give a more pronounced difference in delay between an AJAX call that is fast (for example the page for a single notification) and one that is slow (for example a dashboard for a service with lots of traffic). *Some examples of what this would mean for various pages* Page | Response time | Wait until next AJAX call ---|---|--- Check a reply to address | 130ms | 1,850ms Brand new service dashboard | 229ms | 2,783ms HM Passport Office dashboard | 634ms | 5,294ms NHS Coronavirus Service dashboard | 779ms | 5,977ms _Example of the kind of slowness we’ve seen during an incident_ | 6,000ms | 18,364ms GOV.UK email dashboard | `HTTP 504` | 😬
2020-04-08 17:55:53 +01:00
// The server takes 1 second to respond
jestDateMock.advanceBy(1000);
2019-09-02 14:27:46 +01:00
callback(responseObj);
return jqueryAJAXReturnObj;
},
fail: () => {}
};
$.ajax.mockImplementation(() => jqueryAJAXReturnObj);
// because we're running in node, diffDOM executes as a module
// in the normal browser environment it will attach to window so we replicate that here
window.diffDOM = require('../../node_modules/diff-dom/diffDOM.js');
require('../../app/assets/javascripts/updateContent.js');
});
afterAll(() => {
require('./support/teardown.js');
});
describe('Update content', () => {
beforeEach(() => {
// store HTML in string to allow use in AJAX responses
HTMLString = `
<div data-module="update-content" data-resource="${resourceURL}" data-key="${updateKey}" aria-live="polite">
<div class="bottom-gutter ajax-block-container">
<ul role="tablist" class="pill">
<li aria-selected="true" role="tab">
<div class="pill-selected-item" tabindex="0">
<div class="big-number-smaller">
<div class="big-number-number">0</div>
</div>
<div class="pill-label">total</div>
</div>
</li>
<li aria-selected="false" role="tab">
<a class="govuk-link govuk-link--no-visited-state" href="/services/6658542f-0cad-491f-bec8-ab8457700ead/notifications/email?status=sending">
2019-09-02 14:27:46 +01:00
<div class="big-number-smaller">
<div class="big-number-number">0</div>
</div>
<div class="pill-label">sending</div>
</a>
</li>
<li aria-selected="false" role="tab">
<a class="govuk-link govuk-link--no-visited-state" href="/services/6658542f-0cad-491f-bec8-ab8457700ead/notifications/email?status=delivered">
2019-09-02 14:27:46 +01:00
<div class="big-number-smaller">
<div class="big-number-number">0</div>
</div>
<div class="pill-label">delivered</div>
</a>
</li>
<li aria-selected="false" role="tab">
<a class="govuk-link govuk-link--no-visited-state" href="/services/6658542f-0cad-491f-bec8-ab8457700ead/notifications/email?status=failed">
2019-09-02 14:27:46 +01:00
<div class="big-number-smaller">
<div class="big-number-number">0</div>
</div>
<div class="pill-label">failed</div>
</a>
</li>
</ul>
</div>
</div>`;
document.body.innerHTML = HTMLString;
// default the response to match the existing content
responseObj[updateKey] = HTMLString;
});
afterEach(() => {
document.body.innerHTML = '';
// tidy up record of mocked AJAX calls
$.ajax.mockClear();
// ensure any timers set by continually starting the module are cleared
jest.clearAllTimers();
});
Delay AJAX calls if the server is slow to respond By default our AJAX calls were 2 seconds. Then they were 5 seconds because someone reckoned 2 seconds was putting too much load on the system. Then we made them 10 seconds while we were having an incident. Then we made them 20 seconds for the heaviest pages, but back to 5 seconds or 2 seconds for the rest of the pages. This is not a good situation because: - it slows all services down equally, no matter how much traffic they have, or which features they have switched on - it slows everything down by the same amount, no matter how much load the platform is under - the values are set based on our worst performance, until we manually remember to switch them back - we spend time during incidents deploying changes to slow down the dashboard refresh time because it’s a nothing-to-lose change that might relieve some symptoms, when we could be spending time digging into the underlying cause This pull request makes the Javascript smarter about how long it waits until it makes another AJAX call. It bases the delay on how long the server takes to respond (as a proxy for how much load the server is under). It’s based on the square root of the response time, so is more sensitive to slow downs early on, and less sensitive to slow downs later on. This helps us give a more pronounced difference in delay between an AJAX call that is fast (for example the page for a single notification) and one that is slow (for example a dashboard for a service with lots of traffic). *Some examples of what this would mean for various pages* Page | Response time | Wait until next AJAX call ---|---|--- Check a reply to address | 130ms | 1,850ms Brand new service dashboard | 229ms | 2,783ms HM Passport Office dashboard | 634ms | 5,294ms NHS Coronavirus Service dashboard | 779ms | 5,977ms _Example of the kind of slowness we’ve seen during an incident_ | 6,000ms | 18,364ms GOV.UK email dashboard | `HTTP 504` | 😬
2020-04-08 17:55:53 +01:00
2019-09-02 14:27:46 +01:00
test("It should make requests to the URL specified in the data-resource attribute", () => {
// start the module
window.GOVUK.modules.start();
jest.advanceTimersByTime(2000);
2019-09-02 14:27:46 +01:00
expect($.ajax.mock.calls[0][0]).toEqual(resourceURL);
});
test("If the response contains no changes, the DOM should stay the same", () => {
// send the done callback a response with updates included
responseObj[updateKey] = HTMLString;
// start the module
window.GOVUK.modules.start();
jest.advanceTimersByTime(2000);
2019-09-02 14:27:46 +01:00
// check the right DOM node is updated
expect(document.querySelectorAll('.big-number-number')[0].textContent.trim()).toEqual("0");
});
test("If the response contains changes, it should update the DOM with them", () => {
// send the done callback a response with updates included
responseObj[updateKey] = HTMLString.replace(/<div class="big-number-number">0<\/div>{1}/, '<div class="big-number-number">1</div>');
// start the module
window.GOVUK.modules.start();
jest.advanceTimersByTime(2000);
2019-09-02 14:27:46 +01:00
// check the right DOM node is updated
expect(document.querySelectorAll('.big-number-number')[0].textContent.trim()).toEqual("1");
});
describe("By default", () => {
beforeEach(() => {
// start the module
window.GOVUK.modules.start();
});
test("It should use the GET HTTP method", () => {
jest.advanceTimersByTime(2000);
2019-09-02 14:27:46 +01:00
expect($.ajax.mock.calls[0][1].method).toEqual('get');
});
test("It shouldn't send any data as part of the requests", () => {
jest.advanceTimersByTime(2000);
2019-09-02 14:27:46 +01:00
expect($.ajax.mock.calls[0][1].data).toEqual({});
});
Delay AJAX calls if the server is slow to respond By default our AJAX calls were 2 seconds. Then they were 5 seconds because someone reckoned 2 seconds was putting too much load on the system. Then we made them 10 seconds while we were having an incident. Then we made them 20 seconds for the heaviest pages, but back to 5 seconds or 2 seconds for the rest of the pages. This is not a good situation because: - it slows all services down equally, no matter how much traffic they have, or which features they have switched on - it slows everything down by the same amount, no matter how much load the platform is under - the values are set based on our worst performance, until we manually remember to switch them back - we spend time during incidents deploying changes to slow down the dashboard refresh time because it’s a nothing-to-lose change that might relieve some symptoms, when we could be spending time digging into the underlying cause This pull request makes the Javascript smarter about how long it waits until it makes another AJAX call. It bases the delay on how long the server takes to respond (as a proxy for how much load the server is under). It’s based on the square root of the response time, so is more sensitive to slow downs early on, and less sensitive to slow downs later on. This helps us give a more pronounced difference in delay between an AJAX call that is fast (for example the page for a single notification) and one that is slow (for example a dashboard for a service with lots of traffic). *Some examples of what this would mean for various pages* Page | Response time | Wait until next AJAX call ---|---|--- Check a reply to address | 130ms | 1,850ms Brand new service dashboard | 229ms | 2,783ms HM Passport Office dashboard | 634ms | 5,294ms NHS Coronavirus Service dashboard | 779ms | 5,977ms _Example of the kind of slowness we’ve seen during an incident_ | 6,000ms | 18,364ms GOV.UK email dashboard | `HTTP 504` | 😬
2020-04-08 17:55:53 +01:00
test("It should request updates with a dynamic interval", () => {
2019-09-02 14:27:46 +01:00
// First call doesnt happen in the first 2000ms
jest.advanceTimersByTime(1999);
expect($.ajax).toHaveBeenCalledTimes(0);
// But it happens after 2000ms by default
jest.advanceTimersByTime(1);
2019-09-02 14:27:46 +01:00
expect($.ajax).toHaveBeenCalledTimes(1);
Delay AJAX calls if the server is slow to respond By default our AJAX calls were 2 seconds. Then they were 5 seconds because someone reckoned 2 seconds was putting too much load on the system. Then we made them 10 seconds while we were having an incident. Then we made them 20 seconds for the heaviest pages, but back to 5 seconds or 2 seconds for the rest of the pages. This is not a good situation because: - it slows all services down equally, no matter how much traffic they have, or which features they have switched on - it slows everything down by the same amount, no matter how much load the platform is under - the values are set based on our worst performance, until we manually remember to switch them back - we spend time during incidents deploying changes to slow down the dashboard refresh time because it’s a nothing-to-lose change that might relieve some symptoms, when we could be spending time digging into the underlying cause This pull request makes the Javascript smarter about how long it waits until it makes another AJAX call. It bases the delay on how long the server takes to respond (as a proxy for how much load the server is under). It’s based on the square root of the response time, so is more sensitive to slow downs early on, and less sensitive to slow downs later on. This helps us give a more pronounced difference in delay between an AJAX call that is fast (for example the page for a single notification) and one that is slow (for example a dashboard for a service with lots of traffic). *Some examples of what this would mean for various pages* Page | Response time | Wait until next AJAX call ---|---|--- Check a reply to address | 130ms | 1,850ms Brand new service dashboard | 229ms | 2,783ms HM Passport Office dashboard | 634ms | 5,294ms NHS Coronavirus Service dashboard | 779ms | 5,977ms _Example of the kind of slowness we’ve seen during an incident_ | 6,000ms | 18,364ms GOV.UK email dashboard | `HTTP 504` | 😬
2020-04-08 17:55:53 +01:00
// It took the server 1000ms to respond to the first call so we
// will back off the next call shouldnt happen in the next 6904ms
jest.advanceTimersByTime(6904);
expect($.ajax).toHaveBeenCalledTimes(1);
2019-09-02 14:27:46 +01:00
Delay AJAX calls if the server is slow to respond By default our AJAX calls were 2 seconds. Then they were 5 seconds because someone reckoned 2 seconds was putting too much load on the system. Then we made them 10 seconds while we were having an incident. Then we made them 20 seconds for the heaviest pages, but back to 5 seconds or 2 seconds for the rest of the pages. This is not a good situation because: - it slows all services down equally, no matter how much traffic they have, or which features they have switched on - it slows everything down by the same amount, no matter how much load the platform is under - the values are set based on our worst performance, until we manually remember to switch them back - we spend time during incidents deploying changes to slow down the dashboard refresh time because it’s a nothing-to-lose change that might relieve some symptoms, when we could be spending time digging into the underlying cause This pull request makes the Javascript smarter about how long it waits until it makes another AJAX call. It bases the delay on how long the server takes to respond (as a proxy for how much load the server is under). It’s based on the square root of the response time, so is more sensitive to slow downs early on, and less sensitive to slow downs later on. This helps us give a more pronounced difference in delay between an AJAX call that is fast (for example the page for a single notification) and one that is slow (for example a dashboard for a service with lots of traffic). *Some examples of what this would mean for various pages* Page | Response time | Wait until next AJAX call ---|---|--- Check a reply to address | 130ms | 1,850ms Brand new service dashboard | 229ms | 2,783ms HM Passport Office dashboard | 634ms | 5,294ms NHS Coronavirus Service dashboard | 779ms | 5,977ms _Example of the kind of slowness we’ve seen during an incident_ | 6,000ms | 18,364ms GOV.UK email dashboard | `HTTP 504` | 😬
2020-04-08 17:55:53 +01:00
// But it should happen after 6905ms
jest.advanceTimersByTime(1);
2019-09-02 14:27:46 +01:00
expect($.ajax).toHaveBeenCalledTimes(2);
});
Delay AJAX calls if the server is slow to respond By default our AJAX calls were 2 seconds. Then they were 5 seconds because someone reckoned 2 seconds was putting too much load on the system. Then we made them 10 seconds while we were having an incident. Then we made them 20 seconds for the heaviest pages, but back to 5 seconds or 2 seconds for the rest of the pages. This is not a good situation because: - it slows all services down equally, no matter how much traffic they have, or which features they have switched on - it slows everything down by the same amount, no matter how much load the platform is under - the values are set based on our worst performance, until we manually remember to switch them back - we spend time during incidents deploying changes to slow down the dashboard refresh time because it’s a nothing-to-lose change that might relieve some symptoms, when we could be spending time digging into the underlying cause This pull request makes the Javascript smarter about how long it waits until it makes another AJAX call. It bases the delay on how long the server takes to respond (as a proxy for how much load the server is under). It’s based on the square root of the response time, so is more sensitive to slow downs early on, and less sensitive to slow downs later on. This helps us give a more pronounced difference in delay between an AJAX call that is fast (for example the page for a single notification) and one that is slow (for example a dashboard for a service with lots of traffic). *Some examples of what this would mean for various pages* Page | Response time | Wait until next AJAX call ---|---|--- Check a reply to address | 130ms | 1,850ms Brand new service dashboard | 229ms | 2,783ms HM Passport Office dashboard | 634ms | 5,294ms NHS Coronavirus Service dashboard | 779ms | 5,977ms _Example of the kind of slowness we’ve seen during an incident_ | 6,000ms | 18,364ms GOV.UK email dashboard | `HTTP 504` | 😬
2020-04-08 17:55:53 +01:00
each([
[1000, 0],
[1500, 100],
[4590, 500],
[6905, 1000],
[24000, 10000],
]).test('It calculates a delay of %dms if the API responds in %dms', (waitTime, responseTime) => {
expect(
window.GOVUK.Modules.UpdateContent.calculateBackoff(responseTime)
).toBe(
waitTime
);
});
2019-09-02 14:27:46 +01:00
});
describe("If a form is used as a source for data, referenced in the data-form attribute", () => {
beforeEach(() => {
document.body.innerHTML += `
<form method="post" id="service">
<input type="hidden" name="serviceName" value="Buckhurst surgery" />
<input type="hidden" name="serviceNumber" value="${serviceNumber}" />
</form>`;
document.querySelector('[data-module=update-content]').setAttribute('data-form', 'service');
// start the module
window.GOVUK.modules.start();
});
test("requests should use the same HTTP method as the form", () => {
jest.advanceTimersByTime(2000);
2019-09-02 14:27:46 +01:00
expect($.ajax.mock.calls[0][1].method).toEqual('post');
})
test("requests should use the data from the form", () => {
jest.advanceTimersByTime(2000);
2019-09-02 14:27:46 +01:00
expect($.ajax.mock.calls[0][1].data).toEqual(helpers.getFormDataFromPairs([
['serviceName', 'Buckhurst surgery'],
['serviceNumber', serviceNumber]
]));
})
});
});